ASD ISM 1092 Use separate fax machines for sensitive or classified fax messages
Rescinded in the December 2025 ISM
ISM-1092 is no longer part of the ISM. This page keeps it for reference, for organisations still working to an earlier version.
Existing controls relating to sending and receiving fax messages were rescinded.
What it said
Separate fax machines or MFDs are used for sending sensitive or classified fax messages and all other fax messages.
Quoted as published. The guidance below is written by Control Stack.
In plain English
Under ISM editions that included it, sensitive or classified fax messages had to be sent from fax machines or MFDs separate from those used for all other fax messages.
The control required sensitive or classified fax messages to be sent from different fax machines or multifunction devices (MFDs, which combine printing, scanning and copying) than all other fax messages, so no device sent both. Sensitive means data whose compromise would damage an organisation or person; classified means OFFICIAL: Sensitive, PROTECTED, SECRET or TOP SECRET. The current ISM says fax machines and online fax services are not used for sending or receiving fax messages (ISM-2075).
Why it matters
A device that sent a sensitive or classified fax through cryptographic equipment may retry a failed send later. Plugged straight into the telephone line for other faxes, it can then transmit that message unencrypted, a data spill. Separate devices close that path.
How to implement
Find every device that sends fax messages.
Walk each site and compare what you find with the asset register and the carrier's list of telephone lines, covering fax machines and MFDs with fax turned on. Note which send sensitive or classified fax messages, and retire fax on any device or line nobody needs.
Assign each device to one kind of fax message.
Use it either for sensitive or classified fax messages or for all other fax messages, never both. Label it and record the assignment in the asset register. Where a site can have only one device, choose its use and send the other kind another way.
Keep sensitive or classified devices off direct telephone lines.
Connect each only through its cryptographic equipment, with no direct telephone connection within reach that someone could plug it into after a failed send. Send other fax messages from a separate device on its own line.
Keep it running
Recheck assignments whenever a device is moved, replaced or repatched. Do not reassign a device that has sent sensitive or classified fax messages to other fax messages, since it may still hold one waiting to send.
Evidence and audit
- Check 1 of 2What an auditor asks for
Ask for
The register of fax machines and fax-enabled MFDs with each one's assigned use, compared with a site walk-through and the carrier's list of telephone lines, and a sample of fax messages sent from each device, traced from its transmission journal to the sender's copy or cover sheet, mostly ones sent to receivers that also appear in a sensitive or classified device's journal.
Look at
Whether every device and fax line found is registered, and whether each sampled message's sensitivity or classification matches its device's assigned use.
Good evidence
Every device and fax line found is registered with a single use, and every sampled message's sensitivity or classification matches its device's assigned use, with no device found sending both kinds.
- Check 2 of 2What an auditor asks for
Ask for
An inspection of each device assigned to sensitive or classified fax messages and its connections.
Look at
How it connects to the telephone network, including any switch or second line.
Good evidence
Each connects only through its cryptographic equipment, with no switch or second line that would let it send fax messages without that equipment.




